Z5100 Short-Stroke Cylinder

– Short-stroke cylinders must only be loaded axially

– All bores and feed lines must be free of metal particles and other impurities.

– If metal particles do remain in the bores and
the cylinders develop a leak, the hydraulic fluid feed line must be cleaned as far as the filter of the injection moulding machine.

– The parts moved by the cylinders (split moulds, plates, etc.) must also be guided otherwise the seals in the cylinders may be damaged.

– Seals can only be replaced by the manufacturer in the factory. Other maintenances are not necessary.

– The maximum mould temperature must not exceed 100 °C or 180 °C (see type).

– The screw threads can be produced using W8622, M26x1, M38x1 or M50x1 screw taps.

– The screw taps are available from stock.

– Piston rod and housing hardened and ground.

– Easy assembly: screwed in by means of a face spanner.

– Type Z5100 only for machines with open oil return line

Click here full operating instructions.

A new window will open with a PDF file which you can download.